Easy As 1,2,3

STEP 1 Prepares coat for loose hair removal and begins deshedding process.

FurEx Cleanse Shampoo Step 1 is a deeply penetrating yet gentle shampoo designed to cleanse and neutralise the ionic charge within the coat to remove all dirt, odours and excess sebum. This prepares the coat for loose hair removal and begins the deshedding process.

Our unique FurEx system has been scientifically designed to work together to greatly reduce the time and effort of removing collected undercoats.

For best results, always use all three of the FurEx system products.


  • Straight into the bath
  • No Pre-brushing
  • Kinder and Easier on both groomer and pet
  • All the grooming is done in the bath
  • No major clean up
  • Saves grooming time
  • Long lasting fragrance
  • Safe to use on cats



  • All double coats
  • Short and long coats
  • Heavy coats
  • Any dog breed that drops hair
  • Cats
  • Ideal for Labradors, Pugs, German Shepherds, Samoyeds, Border Collies


  • For best results, always use all three of the FurEx system products
  • It is important to follow the Instructions
  • For Best results please watch our video prior
  • Shake the bottle thoroughly
  • FurEX is concentrated should be diluted prior to usage
  • Tip; add water volume first, then add the product and shake well (use warm water for colder climates)
  • Step 1 requires 2 washes (first wash only can be used in the hydrobath)
  • 2nd wash must be hand washed
  • Always use diluted shampoo within 24-48 hours


Step 1 Cleanse - First Wash

  • Dilute 1 part shampoo to 10 parts water OR add 30- 60 mls to Hydrobath holding tank

Step 1 Cleanse - Second Hand Wash Only

  • Dilute 1 part shampoo to 4 parts water


  1. Dilute products to above instructions
  2. Place pet straight into the bath
  3. First wash (can be applied either by hand or hydrobath)
  4. Wet coat down
  5. Apply diluted shampoo and work into the coat to form a lather
  6. Rinse with fresh water
  7. Second wash (hand wash only)
  8. Apply diluted shampoo and work well into coat
  9. Use either a comb or brush though this will assist to loosen coat
  10. Rinse coat
  11. FurEx Step 2 SEE Release conditioner instructions


  • Always read and follow the instructions carefully, including any warnings for use
  • It is important to avoid contact with the eyes
  • If a dog is squinting or rubbing at eyes, flush gently with tepid water for 5 minutes
  • Always use diluted product within 24-48 hours


  • We recommend when you open a product for the first time that you write the opening date on the bottle
  • Opened products must be used within the opening time suggested on individual bottle label
  • Keep lids on products when not in use and use the product within the recommended time
  • Avoid storing your products in the direct sunlight or near sources of heat and choose dry, cool storage areas where possible.
  • Regularly wash and sterilize all applicators and dilution bottles thoroughly
  • Allow applicators to dry thoroughly before use

This shampoo does not contain soaps, harsh detergents, SLS or SLES, Parabens or Petrochemicals.

Shipping Weight 5.5000kg
Shipping Width 0.180m
Shipping Height 0.310m
Shipping Length 0.130m
Shipping Cubic 0.007254000m3

Be The First To Review This Product!

Help other Mars Pet Grooming Products users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category